22c9:0cf1 — duraSign Pad Biometric 5.0
StepOver GmbH
- Vendor ID
- 22c9
- Product ID
- 0cf1
- Combined
- 22c9:0cf1
- Decimal
- 8905:3313
What is this device?
This is the USB identifier for a duraSign Pad Biometric 5.0 manufactured by StepOver GmbH. The vendor ID 22c9 is registered to StepOver GmbH with the USB Implementers Forum, and 0cf1 is the product ID that StepOver GmbH assigned to this particular model. When you run lsusb on Linux, this device appears as 22c9:0cf1 StepOver GmbH duraSign Pad Biometric 5.0.
How to identify it on your system
Linux
$ lsusb Bus 001 Device 004: ID 22c9:0cf1 StepOver GmbH duraSign Pad Biometric 5.0
You can filter directly with lsusb -d 22c9:0cf1, or get the full descriptor dump with lsusb -v -d 22c9:0cf1. Kernel messages from dmesg show the same pair as idVendor=22c9, idProduct=0cf1.
Windows
In Device Manager, open the device, go to Details → Hardware Ids. This device reports:
USB\VID_22C9&PID_0CF1 USB\VID_22C9&PID_0CF1&REV_0100
From PowerShell: Get-PnpDevice | Where-Object InstanceId -match "VID_22C9&PID_0CF1"
macOS
$ system_profiler SPUSBDataType
duraSign Pad Biometric 5.0:
Product ID: 0x0cf1
Vendor ID: 0x22c9 (StepOver GmbH)Driver help
Having driver issues with this device? Most USB devices are handled by a generic class driver; if yours shows up as an unknown device, confirm the ID above first, then check the manufacturer's downloads page.
Raw usb.ids entry
The exact lines this page is generated from, in the upstream source file:
22c9 StepOver GmbH 0cf1 duraSign Pad Biometric 5.0