22c9:09e1 — naturaSign Pad Biometric
StepOver GmbH
- Vendor ID
- 22c9
- Product ID
- 09e1
- Combined
- 22c9:09e1
- Decimal
- 8905:2529
What is this device?
This is the USB identifier for a naturaSign Pad Biometric manufactured by StepOver GmbH. The vendor ID 22c9 is registered to StepOver GmbH with the USB Implementers Forum, and 09e1 is the product ID that StepOver GmbH assigned to this particular model. When you run lsusb on Linux, this device appears as 22c9:09e1 StepOver GmbH naturaSign Pad Biometric.
How to identify it on your system
Linux
$ lsusb Bus 001 Device 004: ID 22c9:09e1 StepOver GmbH naturaSign Pad Biometric
You can filter directly with lsusb -d 22c9:09e1, or get the full descriptor dump with lsusb -v -d 22c9:09e1. Kernel messages from dmesg show the same pair as idVendor=22c9, idProduct=09e1.
Windows
In Device Manager, open the device, go to Details → Hardware Ids. This device reports:
USB\VID_22C9&PID_09E1 USB\VID_22C9&PID_09E1&REV_0100
From PowerShell: Get-PnpDevice | Where-Object InstanceId -match "VID_22C9&PID_09E1"
macOS
$ system_profiler SPUSBDataType
naturaSign Pad Biometric:
Product ID: 0x09e1
Vendor ID: 0x22c9 (StepOver GmbH)Driver help
Having driver issues with this device? Most USB devices are handled by a generic class driver; if yours shows up as an unknown device, confirm the ID above first, then check the manufacturer's downloads page.
Raw usb.ids entry
The exact lines this page is generated from, in the upstream source file:
22c9 StepOver GmbH 09e1 naturaSign Pad Biometric