225d:000a — MSO1300-E3 Fingerprint Sensor

Morpho

Vendor ID: 225d
Product ID: 000a
Combined: 225d:000a
Decimal: 8797:10

What is this device?

This is the USB identifier for a MSO1300-E3 Fingerprint Sensor manufactured by Morpho. The vendor ID 225d is registered to Morpho with the USB Implementers Forum, and 000a is the product ID that Morpho assigned to this particular model. When you run lsusb on Linux, this device appears as 225d:000a Morpho MSO1300-E3 Fingerprint Sensor.

How to identify it on your system

Linux

$ lsusb
Bus 001 Device 004: ID 225d:000a Morpho MSO1300-E3 Fingerprint Sensor

You can filter directly with lsusb -d 225d:000a, or get the full descriptor dump with lsusb -v -d 225d:000a. Kernel messages from dmesg show the same pair as idVendor=225d, idProduct=000a.

Windows

In Device Manager, open the device, go to Details → Hardware Ids. This device reports:

USB\VID_225D&PID_000A
USB\VID_225D&PID_000A&REV_0100

From PowerShell: Get-PnpDevice | Where-Object InstanceId -match "VID_225D&PID_000A"

macOS

$ system_profiler SPUSBDataType
    MSO1300-E3 Fingerprint Sensor:
      Product ID: 0x000a
      Vendor ID: 0x225d  (Morpho)

Driver help

Having driver issues with this device? Most USB devices are handled by a generic class driver; if yours shows up as an unknown device, confirm the ID above first, then check the manufacturer's downloads page.

Raw usb.ids entry

The exact lines this page is generated from, in the upstream source file:

225d  Morpho
	000a  MSO1300-E3 Fingerprint Sensor

More from Morpho

See all 19 devices from Morpho →