225d:0009 — CBM-V3 Fingerprint Sensor
Morpho
- Vendor ID
- 225d
- Product ID
- 0009
- Combined
- 225d:0009
- Decimal
- 8797:9
What is this device?
This is the USB identifier for a CBM-V3 Fingerprint Sensor manufactured by Morpho. The vendor ID 225d is registered to Morpho with the USB Implementers Forum, and 0009 is the product ID that Morpho assigned to this particular model. When you run lsusb on Linux, this device appears as 225d:0009 Morpho CBM-V3 Fingerprint Sensor.
How to identify it on your system
Linux
$ lsusb Bus 001 Device 004: ID 225d:0009 Morpho CBM-V3 Fingerprint Sensor
You can filter directly with lsusb -d 225d:0009, or get the full descriptor dump with lsusb -v -d 225d:0009. Kernel messages from dmesg show the same pair as idVendor=225d, idProduct=0009.
Windows
In Device Manager, open the device, go to Details → Hardware Ids. This device reports:
USB\VID_225D&PID_0009 USB\VID_225D&PID_0009&REV_0100
From PowerShell: Get-PnpDevice | Where-Object InstanceId -match "VID_225D&PID_0009"
macOS
$ system_profiler SPUSBDataType
CBM-V3 Fingerprint Sensor:
Product ID: 0x0009
Vendor ID: 0x225d (Morpho)Driver help
Having driver issues with this device? Most USB devices are handled by a generic class driver; if yours shows up as an unknown device, confirm the ID above first, then check the manufacturer's downloads page.
Raw usb.ids entry
The exact lines this page is generated from, in the upstream source file:
225d Morpho 0009 CBM-V3 Fingerprint Sensor