1d50:60f6 — EightByEight Blinky Badge
OpenMoko, Inc.
- Vendor ID
- 1d50
- Product ID
- 60f6
- Combined
- 1d50:60f6
- Decimal
- 7504:24822
What is this device?
This is the USB identifier for a EightByEight Blinky Badge manufactured by OpenMoko, Inc.. The vendor ID 1d50 is registered to OpenMoko, Inc. with the USB Implementers Forum, and 60f6 is the product ID that OpenMoko, Inc. assigned to this particular model. When you run lsusb on Linux, this device appears as 1d50:60f6 OpenMoko, Inc. EightByEight Blinky Badge.
How to identify it on your system
Linux
$ lsusb Bus 001 Device 004: ID 1d50:60f6 OpenMoko, Inc. EightByEight Blinky Badge
You can filter directly with lsusb -d 1d50:60f6, or get the full descriptor dump with lsusb -v -d 1d50:60f6. Kernel messages from dmesg show the same pair as idVendor=1d50, idProduct=60f6.
Windows
In Device Manager, open the device, go to Details → Hardware Ids. This device reports:
USB\VID_1D50&PID_60F6 USB\VID_1D50&PID_60F6&REV_0100
From PowerShell: Get-PnpDevice | Where-Object InstanceId -match "VID_1D50&PID_60F6"
macOS
$ system_profiler SPUSBDataType
EightByEight Blinky Badge:
Product ID: 0x60f6
Vendor ID: 0x1d50 (OpenMoko, Inc.)Driver help
Having driver issues with this device? Most USB devices are handled by a generic class driver; if yours shows up as an unknown device, confirm the ID above first, then check the manufacturer's downloads page.
Raw usb.ids entry
The exact lines this page is generated from, in the upstream source file:
1d50 OpenMoko, Inc. 60f6 EightByEight Blinky Badge
More from OpenMoko, Inc.
- 1d50:60f2 UDAD-T2 data acquisition device (boot)
- 1d50:60f3 UDAD-T2 data acquisition device
- 1d50:60f4 Uniti ARC motor controller
- 1d50:60f5 EightByEight Blinky Badge (DFU)
- 1d50:60f7 cardio NFC/RFID card reader (bootloader)
- 1d50:60f8 cardio NFC/RFID card reader
- 1d50:60fc OnlyKey Two-factor Authentication and Password Solution
- 1d50:6100 overlay64 video overlay module