1d50:60f5 — EightByEight Blinky Badge (DFU)
OpenMoko, Inc.
- Vendor ID
- 1d50
- Product ID
- 60f5
- Combined
- 1d50:60f5
- Decimal
- 7504:24821
What is this device?
This is the USB identifier for a EightByEight Blinky Badge (DFU) manufactured by OpenMoko, Inc.. The vendor ID 1d50 is registered to OpenMoko, Inc. with the USB Implementers Forum, and 60f5 is the product ID that OpenMoko, Inc. assigned to this particular model. When you run lsusb on Linux, this device appears as 1d50:60f5 OpenMoko, Inc. EightByEight Blinky Badge (DFU).
How to identify it on your system
Linux
$ lsusb Bus 001 Device 004: ID 1d50:60f5 OpenMoko, Inc. EightByEight Blinky Badge (DFU)
You can filter directly with lsusb -d 1d50:60f5, or get the full descriptor dump with lsusb -v -d 1d50:60f5. Kernel messages from dmesg show the same pair as idVendor=1d50, idProduct=60f5.
Windows
In Device Manager, open the device, go to Details → Hardware Ids. This device reports:
USB\VID_1D50&PID_60F5 USB\VID_1D50&PID_60F5&REV_0100
From PowerShell: Get-PnpDevice | Where-Object InstanceId -match "VID_1D50&PID_60F5"
macOS
$ system_profiler SPUSBDataType
EightByEight Blinky Badge (DFU):
Product ID: 0x60f5
Vendor ID: 0x1d50 (OpenMoko, Inc.)Driver help
Having driver issues with this device? Most USB devices are handled by a generic class driver; if yours shows up as an unknown device, confirm the ID above first, then check the manufacturer's downloads page.
Raw usb.ids entry
The exact lines this page is generated from, in the upstream source file:
1d50 OpenMoko, Inc. 60f5 EightByEight Blinky Badge (DFU)
More from OpenMoko, Inc.
- 1d50:60f1 UDAD-T1 data acquisition device
- 1d50:60f2 UDAD-T2 data acquisition device (boot)
- 1d50:60f3 UDAD-T2 data acquisition device
- 1d50:60f4 Uniti ARC motor controller
- 1d50:60f6 EightByEight Blinky Badge
- 1d50:60f7 cardio NFC/RFID card reader (bootloader)
- 1d50:60f8 cardio NFC/RFID card reader
- 1d50:60fc OnlyKey Two-factor Authentication and Password Solution