1d50:6064 — CPC FPGA (DFU)

This is the USB identifier for a CPC FPGA (DFU) manufactured by OpenMoko, Inc.. The vendor ID 1d50 is registered to OpenMoko, Inc. with the USB Implementers Forum, and 6064 is the product ID that OpenMoko, Inc. assigned to this particular model. When you run lsusb on Linux, this device appears as 1d50:6064 OpenMoko, Inc. CPC FPGA (DFU).

Linux

$ lsusb
Bus 001 Device 004: ID 1d50:6064 OpenMoko, Inc. CPC FPGA (DFU)

You can filter directly with lsusb -d 1d50:6064, or get the full descriptor dump with lsusb -v -d 1d50:6064. Kernel messages from dmesg show the same pair as idVendor=1d50, idProduct=6064.

Windows

In Device Manager, open the device, go to Details → Hardware Ids. This device reports:

USB\VID_1D50&PID_6064
USB\VID_1D50&PID_6064&REV_0100

From PowerShell: Get-PnpDevice | Where-Object InstanceId -match "VID_1D50&PID_6064"

macOS

$ system_profiler SPUSBDataType
    CPC FPGA (DFU):
      Product ID: 0x6064
      Vendor ID: 0x1d50  (OpenMoko, Inc.)

Having driver issues with this device? Most USB devices are handled by a generic class driver; if yours shows up as an unknown device, confirm the ID above first, then check the manufacturer's downloads page.

The exact lines this page is generated from, in the upstream source file:

1d50  OpenMoko, Inc.
	6064  CPC FPGA (DFU)

• 1d50:6060 Data logger using the Cypress FX2
• 1d50:6061 Power Manager
• 1d50:6062 WhiteRabbit console and Wishbone bridge
• 1d50:6063 CPC FPGA
• 1d50:6065 CPC FPGA (Serial)
• 1d50:6066 Nuand BladeRF
• 1d50:6067 Orbotron 9000 (Serial)
• 1d50:6068 Orbotron 9000 (HID)

See all 314 devices from OpenMoko, Inc. →