1d50:6062 — WhiteRabbit console and Wishbone bridge

This is the USB identifier for a WhiteRabbit console and Wishbone bridge manufactured by OpenMoko, Inc.. The vendor ID 1d50 is registered to OpenMoko, Inc. with the USB Implementers Forum, and 6062 is the product ID that OpenMoko, Inc. assigned to this particular model. When you run lsusb on Linux, this device appears as 1d50:6062 OpenMoko, Inc. WhiteRabbit console and Wishbone bridge.

Linux

$ lsusb
Bus 001 Device 004: ID 1d50:6062 OpenMoko, Inc. WhiteRabbit console and Wishbone bridge

You can filter directly with lsusb -d 1d50:6062, or get the full descriptor dump with lsusb -v -d 1d50:6062. Kernel messages from dmesg show the same pair as idVendor=1d50, idProduct=6062.

Windows

In Device Manager, open the device, go to Details → Hardware Ids. This device reports:

USB\VID_1D50&PID_6062
USB\VID_1D50&PID_6062&REV_0100

From PowerShell: Get-PnpDevice | Where-Object InstanceId -match "VID_1D50&PID_6062"

macOS

$ system_profiler SPUSBDataType
    WhiteRabbit console and Wishbone bridge:
      Product ID: 0x6062
      Vendor ID: 0x1d50  (OpenMoko, Inc.)

Having driver issues with this device? Most USB devices are handled by a generic class driver; if yours shows up as an unknown device, confirm the ID above first, then check the manufacturer's downloads page.

The exact lines this page is generated from, in the upstream source file:

1d50  OpenMoko, Inc.
	6062  WhiteRabbit console and Wishbone bridge

• 1d50:605e Blinkiverse Analog LED Fader
• 1d50:605f Small DIP package Cypress FX2
• 1d50:6060 Data logger using the Cypress FX2
• 1d50:6061 Power Manager
• 1d50:6063 CPC FPGA
• 1d50:6064 CPC FPGA (DFU)
• 1d50:6065 CPC FPGA (Serial)
• 1d50:6066 Nuand BladeRF

See all 314 devices from OpenMoko, Inc. →