09cb:1006 — Ex-Series RNDIS and MSD interface
FLIR Systems
- Vendor ID
- 09cb
- Product ID
- 1006
- Combined
- 09cb:1006
- Decimal
- 2507:4102
What is this device?
This is the USB identifier for a Ex-Series RNDIS and MSD interface manufactured by FLIR Systems. The vendor ID 09cb is registered to FLIR Systems with the USB Implementers Forum, and 1006 is the product ID that FLIR Systems assigned to this particular model. When you run lsusb on Linux, this device appears as 09cb:1006 FLIR Systems Ex-Series RNDIS and MSD interface.
How to identify it on your system
Linux
$ lsusb Bus 001 Device 004: ID 09cb:1006 FLIR Systems Ex-Series RNDIS and MSD interface
You can filter directly with lsusb -d 09cb:1006, or get the full descriptor dump with lsusb -v -d 09cb:1006. Kernel messages from dmesg show the same pair as idVendor=09cb, idProduct=1006.
Windows
In Device Manager, open the device, go to Details → Hardware Ids. This device reports:
USB\VID_09CB&PID_1006 USB\VID_09CB&PID_1006&REV_0100
From PowerShell: Get-PnpDevice | Where-Object InstanceId -match "VID_09CB&PID_1006"
macOS
$ system_profiler SPUSBDataType
Ex-Series RNDIS and MSD interface:
Product ID: 0x1006
Vendor ID: 0x09cb (FLIR Systems)Driver help
Having driver issues with this device? Most USB devices are handled by a generic class driver; if yours shows up as an unknown device, confirm the ID above first, then check the manufacturer's downloads page.
Raw usb.ids entry
The exact lines this page is generated from, in the upstream source file:
09cb FLIR Systems 1006 Ex-Series RNDIS and MSD interface