09cb:1001 — Network Adapter

This is the USB identifier for a Network Adapter manufactured by FLIR Systems. The vendor ID 09cb is registered to FLIR Systems with the USB Implementers Forum, and 1001 is the product ID that FLIR Systems assigned to this particular model. When you run lsusb on Linux, this device appears as 09cb:1001 FLIR Systems Network Adapter.

Linux

$ lsusb
Bus 001 Device 004: ID 09cb:1001 FLIR Systems Network Adapter

You can filter directly with lsusb -d 09cb:1001, or get the full descriptor dump with lsusb -v -d 09cb:1001. Kernel messages from dmesg show the same pair as idVendor=09cb, idProduct=1001.

Windows

In Device Manager, open the device, go to Details → Hardware Ids. This device reports:

USB\VID_09CB&PID_1001
USB\VID_09CB&PID_1001&REV_0100

From PowerShell: Get-PnpDevice | Where-Object InstanceId -match "VID_09CB&PID_1001"

macOS

$ system_profiler SPUSBDataType
    Network Adapter:
      Product ID: 0x1001
      Vendor ID: 0x09cb  (FLIR Systems)

Having driver issues with this device? Most USB devices are handled by a generic class driver; if yours shows up as an unknown device, confirm the ID above first, then check the manufacturer's downloads page.

The exact lines this page is generated from, in the upstream source file:

09cb  FLIR Systems
	1001  Network Adapter

• 09cb:1002 Ex-Series RNDIS interface
• 09cb:1004 Ex-Series UVC interface
• 09cb:1005 Ex-Series RNDIS and UVC interface
• 09cb:1006 Ex-Series RNDIS and MSD interface

See all 9 devices from FLIR Systems →