f4ed:ee3a — SDG1010 Waveform Generator (TMC mode)

This is the USB identifier for a SDG1010 Waveform Generator (TMC mode) manufactured by Shenzhen Siglent Co., Ltd.. The vendor ID f4ed is registered to Shenzhen Siglent Co., Ltd. with the USB Implementers Forum, and ee3a is the product ID that Shenzhen Siglent Co., Ltd. assigned to this particular model. When you run lsusb on Linux, this device appears as f4ed:ee3a Shenzhen Siglent Co., Ltd. SDG1010 Waveform Generator (TMC mode).

Linux

$ lsusb
Bus 001 Device 004: ID f4ed:ee3a Shenzhen Siglent Co., Ltd. SDG1010 Waveform Generator (TMC mode)

You can filter directly with lsusb -d f4ed:ee3a, or get the full descriptor dump with lsusb -v -d f4ed:ee3a. Kernel messages from dmesg show the same pair as idVendor=f4ed, idProduct=ee3a.

Windows

In Device Manager, open the device, go to Details → Hardware Ids. This device reports:

USB\VID_F4ED&PID_EE3A
USB\VID_F4ED&PID_EE3A&REV_0100

From PowerShell: Get-PnpDevice | Where-Object InstanceId -match "VID_F4ED&PID_EE3A"

macOS

$ system_profiler SPUSBDataType
    SDG1010 Waveform Generator (TMC mode):
      Product ID: 0xee3a
      Vendor ID: 0xf4ed  (Shenzhen Siglent Co., Ltd.)

Having driver issues with this device? Most USB devices are handled by a generic class driver; if yours shows up as an unknown device, confirm the ID above first, then check the manufacturer's downloads page.

The exact lines this page is generated from, in the upstream source file:

f4ed  Shenzhen Siglent Co., Ltd.
	ee3a  SDG1010 Waveform Generator (TMC mode)

• f4ed:ee37 SDG1010 Waveform Generator

See all 2 devices from Shenzhen Siglent Co., Ltd. →