2ca3:0008 — Mavic Mini MR1SD25 Remote controller
DJI Technology Co., Ltd.
- Vendor ID
- 2ca3
- Product ID
- 0008
- Combined
- 2ca3:0008
- Decimal
- 11427:8
What is this device?
This is the USB identifier for a Mavic Mini MR1SD25 Remote controller manufactured by DJI Technology Co., Ltd.. The vendor ID 2ca3 is registered to DJI Technology Co., Ltd. with the USB Implementers Forum, and 0008 is the product ID that DJI Technology Co., Ltd. assigned to this particular model. When you run lsusb on Linux, this device appears as 2ca3:0008 DJI Technology Co., Ltd. Mavic Mini MR1SD25 Remote controller.
How to identify it on your system
Linux
$ lsusb Bus 001 Device 004: ID 2ca3:0008 DJI Technology Co., Ltd. Mavic Mini MR1SD25 Remote controller
You can filter directly with lsusb -d 2ca3:0008, or get the full descriptor dump with lsusb -v -d 2ca3:0008. Kernel messages from dmesg show the same pair as idVendor=2ca3, idProduct=0008.
Windows
In Device Manager, open the device, go to Details → Hardware Ids. This device reports:
USB\VID_2CA3&PID_0008 USB\VID_2CA3&PID_0008&REV_0100
From PowerShell: Get-PnpDevice | Where-Object InstanceId -match "VID_2CA3&PID_0008"
macOS
$ system_profiler SPUSBDataType
Mavic Mini MR1SD25 Remote controller:
Product ID: 0x0008
Vendor ID: 0x2ca3 (DJI Technology Co., Ltd.)Driver help
Having driver issues with this device? Most USB devices are handled by a generic class driver; if yours shows up as an unknown device, confirm the ID above first, then check the manufacturer's downloads page.
Raw usb.ids entry
The exact lines this page is generated from, in the upstream source file:
2ca3 DJI Technology Co., Ltd. 0008 Mavic Mini MR1SD25 Remote controller