2b0e:610d — Lex720 [LePro 3] in debug

This is the USB identifier for a Lex720 [LePro 3] in debug manufactured by LeEco. The vendor ID 2b0e is registered to LeEco with the USB Implementers Forum, and 610d is the product ID that LeEco assigned to this particular model. When you run lsusb on Linux, this device appears as 2b0e:610d LeEco Lex720 [LePro 3] in debug.

Linux

$ lsusb
Bus 001 Device 004: ID 2b0e:610d LeEco Lex720 [LePro 3] in debug

You can filter directly with lsusb -d 2b0e:610d, or get the full descriptor dump with lsusb -v -d 2b0e:610d. Kernel messages from dmesg show the same pair as idVendor=2b0e, idProduct=610d.

Windows

In Device Manager, open the device, go to Details → Hardware Ids. This device reports:

USB\VID_2B0E&PID_610D
USB\VID_2B0E&PID_610D&REV_0100

From PowerShell: Get-PnpDevice | Where-Object InstanceId -match "VID_2B0E&PID_610D"

macOS

$ system_profiler SPUSBDataType
    Lex720 [LePro 3] in debug:
      Product ID: 0x610d
      Vendor ID: 0x2b0e  (LeEco)

Having driver issues with this device? Most USB devices are handled by a generic class driver; if yours shows up as an unknown device, confirm the ID above first, then check the manufacturer's downloads page.

The exact lines this page is generated from, in the upstream source file:

2b0e  LeEco
	610d  Lex720 [LePro 3] in debug

• 2b0e:2b0e LeEco
• 2b0e:6108 Lex720 [LePro 3] in connection sharing usb
• 2b0e:610b Lex720 [LePro 3] in Camera mode
• 2b0e:610c Lex720 [LePro 3]

See all 9 devices from LeEco →