2a6e:8003 — Touch Board

This is the USB identifier for a Touch Board manufactured by Bare Conductive. The vendor ID 2a6e is registered to Bare Conductive with the USB Implementers Forum, and 8003 is the product ID that Bare Conductive assigned to this particular model. When you run lsusb on Linux, this device appears as 2a6e:8003 Bare Conductive Touch Board.

Linux

$ lsusb
Bus 001 Device 004: ID 2a6e:8003 Bare Conductive Touch Board

You can filter directly with lsusb -d 2a6e:8003, or get the full descriptor dump with lsusb -v -d 2a6e:8003. Kernel messages from dmesg show the same pair as idVendor=2a6e, idProduct=8003.

Windows

In Device Manager, open the device, go to Details → Hardware Ids. This device reports:

USB\VID_2A6E&PID_8003
USB\VID_2A6E&PID_8003&REV_0100

From PowerShell: Get-PnpDevice | Where-Object InstanceId -match "VID_2A6E&PID_8003"

macOS

$ system_profiler SPUSBDataType
    Touch Board:
      Product ID: 0x8003
      Vendor ID: 0x2a6e  (Bare Conductive)

Having driver issues with this device? Most USB devices are handled by a generic class driver; if yours shows up as an unknown device, confirm the ID above first, then check the manufacturer's downloads page.

The exact lines this page is generated from, in the upstream source file:

2a6e  Bare Conductive
	8003  Touch Board

• 2a6e:0003 Touch Board

See all 2 devices from Bare Conductive →