2a13:0000 — S-Series data capture device

This is the USB identifier for a S-Series data capture device manufactured by Grabba International. The vendor ID 2a13 is registered to Grabba International with the USB Implementers Forum, and 0000 is the product ID that Grabba International assigned to this particular model. When you run lsusb on Linux, this device appears as 2a13:0000 Grabba International S-Series data capture device.

Linux

$ lsusb
Bus 001 Device 004: ID 2a13:0000 Grabba International S-Series data capture device

You can filter directly with lsusb -d 2a13:0000, or get the full descriptor dump with lsusb -v -d 2a13:0000. Kernel messages from dmesg show the same pair as idVendor=2a13, idProduct=0000.

Windows

In Device Manager, open the device, go to Details → Hardware Ids. This device reports:

USB\VID_2A13&PID_0000
USB\VID_2A13&PID_0000&REV_0100

From PowerShell: Get-PnpDevice | Where-Object InstanceId -match "VID_2A13&PID_0000"

macOS

$ system_profiler SPUSBDataType
    S-Series data capture device:
      Product ID: 0x0000
      Vendor ID: 0x2a13  (Grabba International)

Having driver issues with this device? Most USB devices are handled by a generic class driver; if yours shows up as an unknown device, confirm the ID above first, then check the manufacturer's downloads page.

The exact lines this page is generated from, in the upstream source file:

2a13  Grabba International
	0000  S-Series data capture device

See all 1 devices from Grabba International →