28c7:0001 — 3D printer serial interface

This is the USB identifier for a 3D printer serial interface manufactured by Ultimaker B.V.. The vendor ID 28c7 is registered to Ultimaker B.V. with the USB Implementers Forum, and 0001 is the product ID that Ultimaker B.V. assigned to this particular model. When you run lsusb on Linux, this device appears as 28c7:0001 Ultimaker B.V. 3D printer serial interface.

Linux

$ lsusb
Bus 001 Device 004: ID 28c7:0001 Ultimaker B.V. 3D printer serial interface

You can filter directly with lsusb -d 28c7:0001, or get the full descriptor dump with lsusb -v -d 28c7:0001. Kernel messages from dmesg show the same pair as idVendor=28c7, idProduct=0001.

Windows

In Device Manager, open the device, go to Details → Hardware Ids. This device reports:

USB\VID_28C7&PID_0001
USB\VID_28C7&PID_0001&REV_0100

From PowerShell: Get-PnpDevice | Where-Object InstanceId -match "VID_28C7&PID_0001"

macOS

$ system_profiler SPUSBDataType
    3D printer serial interface:
      Product ID: 0x0001
      Vendor ID: 0x28c7  (Ultimaker B.V.)

Having driver issues with this device? Most USB devices are handled by a generic class driver; if yours shows up as an unknown device, confirm the ID above first, then check the manufacturer's downloads page.

The exact lines this page is generated from, in the upstream source file:

28c7  Ultimaker B.V.
	0001  3D printer serial interface

See all 1 devices from Ultimaker B.V. →