2803:0001 — Controller Area Network car alarm module [SLCAN-2]
StarLine LLC.
- Vendor ID
- 2803
- Product ID
- 0001
- Combined
- 2803:0001
- Decimal
- 10243:1
What is this device?
This is the USB identifier for a Controller Area Network car alarm module [SLCAN-2] manufactured by StarLine LLC.. The vendor ID 2803 is registered to StarLine LLC. with the USB Implementers Forum, and 0001 is the product ID that StarLine LLC. assigned to this particular model. When you run lsusb on Linux, this device appears as 2803:0001 StarLine LLC. Controller Area Network car alarm module [SLCAN-2].
How to identify it on your system
Linux
$ lsusb Bus 001 Device 004: ID 2803:0001 StarLine LLC. Controller Area Network car alarm module [SLCAN-2]
You can filter directly with lsusb -d 2803:0001, or get the full descriptor dump with lsusb -v -d 2803:0001. Kernel messages from dmesg show the same pair as idVendor=2803, idProduct=0001.
Windows
In Device Manager, open the device, go to Details → Hardware Ids. This device reports:
USB\VID_2803&PID_0001 USB\VID_2803&PID_0001&REV_0100
From PowerShell: Get-PnpDevice | Where-Object InstanceId -match "VID_2803&PID_0001"
macOS
$ system_profiler SPUSBDataType
Controller Area Network car alarm module [SLCAN-2]:
Product ID: 0x0001
Vendor ID: 0x2803 (StarLine LLC.)Driver help
Having driver issues with this device? Most USB devices are handled by a generic class driver; if yours shows up as an unknown device, confirm the ID above first, then check the manufacturer's downloads page.
Raw usb.ids entry
The exact lines this page is generated from, in the upstream source file:
2803 StarLine LLC. 0001 Controller Area Network car alarm module [SLCAN-2]