2689:0df1 — duraSign Pad Biometric US 10.0
StepOver International GmbH
- Vendor ID
- 2689
- Product ID
- 0df1
- Combined
- 2689:0df1
- Decimal
- 9865:3569
What is this device?
This is the USB identifier for a duraSign Pad Biometric US 10.0 manufactured by StepOver International GmbH. The vendor ID 2689 is registered to StepOver International GmbH with the USB Implementers Forum, and 0df1 is the product ID that StepOver International GmbH assigned to this particular model. When you run lsusb on Linux, this device appears as 2689:0df1 StepOver International GmbH duraSign Pad Biometric US 10.0.
How to identify it on your system
Linux
$ lsusb Bus 001 Device 004: ID 2689:0df1 StepOver International GmbH duraSign Pad Biometric US 10.0
You can filter directly with lsusb -d 2689:0df1, or get the full descriptor dump with lsusb -v -d 2689:0df1. Kernel messages from dmesg show the same pair as idVendor=2689, idProduct=0df1.
Windows
In Device Manager, open the device, go to Details → Hardware Ids. This device reports:
USB\VID_2689&PID_0DF1 USB\VID_2689&PID_0DF1&REV_0100
From PowerShell: Get-PnpDevice | Where-Object InstanceId -match "VID_2689&PID_0DF1"
macOS
$ system_profiler SPUSBDataType
duraSign Pad Biometric US 10.0:
Product ID: 0x0df1
Vendor ID: 0x2689 (StepOver International GmbH)Driver help
Having driver issues with this device? Most USB devices are handled by a generic class driver; if yours shows up as an unknown device, confirm the ID above first, then check the manufacturer's downloads page.
Raw usb.ids entry
The exact lines this page is generated from, in the upstream source file:
2689 StepOver International GmbH 0df1 duraSign Pad Biometric US 10.0