2125:0010 — MCB-100 Series

This is the USB identifier for a MCB-100 Series manufactured by Fiberpro Inc.. The vendor ID 2125 is registered to Fiberpro Inc. with the USB Implementers Forum, and 0010 is the product ID that Fiberpro Inc. assigned to this particular model. When you run lsusb on Linux, this device appears as 2125:0010 Fiberpro Inc. MCB-100 Series.

Linux

$ lsusb
Bus 001 Device 004: ID 2125:0010 Fiberpro Inc. MCB-100 Series

You can filter directly with lsusb -d 2125:0010, or get the full descriptor dump with lsusb -v -d 2125:0010. Kernel messages from dmesg show the same pair as idVendor=2125, idProduct=0010.

Windows

In Device Manager, open the device, go to Details → Hardware Ids. This device reports:

USB\VID_2125&PID_0010
USB\VID_2125&PID_0010&REV_0100

From PowerShell: Get-PnpDevice | Where-Object InstanceId -match "VID_2125&PID_0010"

macOS

$ system_profiler SPUSBDataType
    MCB-100 Series:
      Product ID: 0x0010
      Vendor ID: 0x2125  (Fiberpro Inc.)

Having driver issues with this device? Most USB devices are handled by a generic class driver; if yours shows up as an unknown device, confirm the ID above first, then check the manufacturer's downloads page.

The exact lines this page is generated from, in the upstream source file:

2125  Fiberpro Inc.
	0010  MCB-100 Series

• 2125:0000 Bootloader

See all 2 devices from Fiberpro Inc. →