1d50:60e9 — keyman64 keyboard itercepter
OpenMoko, Inc.
- Vendor ID
- 1d50
- Product ID
- 60e9
- Combined
- 1d50:60e9
- Decimal
- 7504:24809
What is this device?
This is the USB identifier for a keyman64 keyboard itercepter manufactured by OpenMoko, Inc.. The vendor ID 1d50 is registered to OpenMoko, Inc. with the USB Implementers Forum, and 60e9 is the product ID that OpenMoko, Inc. assigned to this particular model. When you run lsusb on Linux, this device appears as 1d50:60e9 OpenMoko, Inc. keyman64 keyboard itercepter.
How to identify it on your system
Linux
$ lsusb Bus 001 Device 004: ID 1d50:60e9 OpenMoko, Inc. keyman64 keyboard itercepter
You can filter directly with lsusb -d 1d50:60e9, or get the full descriptor dump with lsusb -v -d 1d50:60e9. Kernel messages from dmesg show the same pair as idVendor=1d50, idProduct=60e9.
Windows
In Device Manager, open the device, go to Details → Hardware Ids. This device reports:
USB\VID_1D50&PID_60E9 USB\VID_1D50&PID_60E9&REV_0100
From PowerShell: Get-PnpDevice | Where-Object InstanceId -match "VID_1D50&PID_60E9"
macOS
$ system_profiler SPUSBDataType
keyman64 keyboard itercepter:
Product ID: 0x60e9
Vendor ID: 0x1d50 (OpenMoko, Inc.)Driver help
Having driver issues with this device? Most USB devices are handled by a generic class driver; if yours shows up as an unknown device, confirm the ID above first, then check the manufacturer's downloads page.
Raw usb.ids entry
The exact lines this page is generated from, in the upstream source file:
1d50 OpenMoko, Inc. 60e9 keyman64 keyboard itercepter
More from OpenMoko, Inc.
- 1d50:60e5 3D printed racing game
- 1d50:60e6 replacement for GoodFET/FaceDancer - GreatFet
- 1d50:60e7 replacement for GoodFET/FaceDancer - GreatFet target
- 1d50:60e8 Alpen Clack keyboard
- 1d50:60ea Wiggleport FPGA-based I/O board
- 1d50:60eb candleLight CAN adapter
- 1d50:60ec Duet 2 WiFi or Duet 2 Ethernet 3D printer control electronics
- 1d50:60ed Duet 2 Maestro 3D printer control electronics