152d:578e — JMS578 SATA 6Gb/s bridge

This is the USB identifier for a JMS578 SATA 6Gb/s bridge manufactured by JMicron Technology Corp. / JMicron USA Technology Corp.. The vendor ID 152d is registered to JMicron Technology Corp. / JMicron USA Technology Corp. with the USB Implementers Forum, and 578e is the product ID that JMicron Technology Corp. / JMicron USA Technology Corp. assigned to this particular model. When you run lsusb on Linux, this device appears as 152d:578e JMicron Technology Corp. / JMicron USA Technology Corp. JMS578 SATA 6Gb/s bridge.

Linux

$ lsusb
Bus 001 Device 004: ID 152d:578e JMicron Technology Corp. / JMicron USA Technology Corp. JMS578 SATA 6Gb/s bridge

You can filter directly with lsusb -d 152d:578e, or get the full descriptor dump with lsusb -v -d 152d:578e. Kernel messages from dmesg show the same pair as idVendor=152d, idProduct=578e.

Windows

In Device Manager, open the device, go to Details → Hardware Ids. This device reports:

USB\VID_152D&PID_578E
USB\VID_152D&PID_578E&REV_0100

From PowerShell: Get-PnpDevice | Where-Object InstanceId -match "VID_152D&PID_578E"

macOS

$ system_profiler SPUSBDataType
    JMS578 SATA 6Gb/s bridge:
      Product ID: 0x578e
      Vendor ID: 0x152d  (JMicron Technology Corp. / JMicron USA Technology Corp.)

Having driver issues with this device? Most USB devices are handled by a generic class driver; if yours shows up as an unknown device, confirm the ID above first, then check the manufacturer's downloads page.

The exact lines this page is generated from, in the upstream source file:

152d  JMicron Technology Corp. / JMicron USA Technology Corp.
	578e  JMS578 SATA 6Gb/s bridge

• 152d:2566 JMS566 SATA 3Gb/s bridge
• 152d:2590 JMS567 SATA 6Gb/s bridge
• 152d:3562 JMS567 SATA 6Gb/s bridge
• 152d:3569 JMS566 SATA 3Gb/s bridge
• 152d:8561 salcar docking station two disks

See all 27 devices from JMicron Technology Corp. / JMicron USA Technology Corp. →