1493:001e — Ibisbill [Ambit3 Run]

This is the USB identifier for a Ibisbill [Ambit3 Run] manufactured by Suunto. The vendor ID 1493 is registered to Suunto with the USB Implementers Forum, and 001e is the product ID that Suunto assigned to this particular model. When you run lsusb on Linux, this device appears as 1493:001e Suunto Ibisbill [Ambit3 Run].

Linux

$ lsusb
Bus 001 Device 004: ID 1493:001e Suunto Ibisbill [Ambit3 Run]

You can filter directly with lsusb -d 1493:001e, or get the full descriptor dump with lsusb -v -d 1493:001e. Kernel messages from dmesg show the same pair as idVendor=1493, idProduct=001e.

Windows

In Device Manager, open the device, go to Details → Hardware Ids. This device reports:

USB\VID_1493&PID_001E
USB\VID_1493&PID_001E&REV_0100

From PowerShell: Get-PnpDevice | Where-Object InstanceId -match "VID_1493&PID_001E"

macOS

$ system_profiler SPUSBDataType
    Ibisbill [Ambit3 Run]:
      Product ID: 0x001e
      Vendor ID: 0x1493  (Suunto)

Having driver issues with this device? Most USB devices are handled by a generic class driver; if yours shows up as an unknown device, confirm the ID above first, then check the manufacturer's downloads page.

The exact lines this page is generated from, in the upstream source file:

1493  Suunto
	001e  Ibisbill [Ambit3 Run]

• 1493:001a Colibri [Ambit2 S]
• 1493:001b Emu [Ambit3 Peak]
• 1493:001c Finch [Ambit3 Sport]
• 1493:001d Greentit [Ambit2 R]

See all 7 devices from Suunto →