132b:0018 — Minolta DiMAGE Z3 (PictBridge mode)
Konica Minolta
- Vendor ID
- 132b
- Product ID
- 0018
- Combined
- 132b:0018
- Decimal
- 4907:24
What is this device?
This is the USB identifier for a Minolta DiMAGE Z3 (PictBridge mode) manufactured by Konica Minolta. The vendor ID 132b is registered to Konica Minolta with the USB Implementers Forum, and 0018 is the product ID that Konica Minolta assigned to this particular model. When you run lsusb on Linux, this device appears as 132b:0018 Konica Minolta Minolta DiMAGE Z3 (PictBridge mode).
How to identify it on your system
Linux
$ lsusb Bus 001 Device 004: ID 132b:0018 Konica Minolta Minolta DiMAGE Z3 (PictBridge mode)
You can filter directly with lsusb -d 132b:0018, or get the full descriptor dump with lsusb -v -d 132b:0018. Kernel messages from dmesg show the same pair as idVendor=132b, idProduct=0018.
Windows
In Device Manager, open the device, go to Details → Hardware Ids. This device reports:
USB\VID_132B&PID_0018 USB\VID_132B&PID_0018&REV_0100
From PowerShell: Get-PnpDevice | Where-Object InstanceId -match "VID_132B&PID_0018"
macOS
$ system_profiler SPUSBDataType
Minolta DiMAGE Z3 (PictBridge mode):
Product ID: 0x0018
Vendor ID: 0x132b (Konica Minolta)Driver help
Having driver issues with this device? Most USB devices are handled by a generic class driver; if yours shows up as an unknown device, confirm the ID above first, then check the manufacturer's downloads page.
Raw usb.ids entry
The exact lines this page is generated from, in the upstream source file:
132b Konica Minolta 0018 Minolta DiMAGE Z3 (PictBridge mode)