12d1:1805 — AT&T Go Phone U2800A phone

This is the USB identifier for a AT&T Go Phone U2800A phone manufactured by Huawei Technologies Co., Ltd.. The vendor ID 12d1 is registered to Huawei Technologies Co., Ltd. with the USB Implementers Forum, and 1805 is the product ID that Huawei Technologies Co., Ltd. assigned to this particular model. When you run lsusb on Linux, this device appears as 12d1:1805 Huawei Technologies Co., Ltd. AT&T Go Phone U2800A phone.

Linux

$ lsusb
Bus 001 Device 004: ID 12d1:1805 Huawei Technologies Co., Ltd. AT&T Go Phone U2800A phone

You can filter directly with lsusb -d 12d1:1805, or get the full descriptor dump with lsusb -v -d 12d1:1805. Kernel messages from dmesg show the same pair as idVendor=12d1, idProduct=1805.

Windows

In Device Manager, open the device, go to Details → Hardware Ids. This device reports:

USB\VID_12D1&PID_1805
USB\VID_12D1&PID_1805&REV_0100

From PowerShell: Get-PnpDevice | Where-Object InstanceId -match "VID_12D1&PID_1805"

macOS

$ system_profiler SPUSBDataType
    AT&T Go Phone U2800A phone:
      Product ID: 0x1805
      Vendor ID: 0x12d1  (Huawei Technologies Co., Ltd.)

Having driver issues with this device? Most USB devices are handled by a generic class driver; if yours shows up as an unknown device, confirm the ID above first, then check the manufacturer's downloads page.

The exact lines this page is generated from, in the upstream source file:

12d1  Huawei Technologies Co., Ltd.
	1805  AT&T Go Phone U2800A phone

• 12d1:1575 K5150 LTE modem
• 12d1:15bb ME936 LTE/HSDPA+ 4G modem
• 12d1:15c1 ME906s LTE M.2 Module
• 12d1:15ca E3131 3G/UMTS/HSPA+ Modem (Mass Storage Mode)
• 12d1:1c05 Broadband stick (modem on)
• 12d1:1c0b E173s 3G broadband stick (modem off)
• 12d1:1c20 R205 Mobile WiFi (Charging)
• 12d1:1d50 ET302s TD-SCDMA/TD-HSDPA Mobile Broadband

See all 54 devices from Huawei Technologies Co., Ltd. →