1209:f3fc — dRonin Flight controller-Lumenier Lux
Generic
- Vendor ID
- 1209
- Product ID
- f3fc
- Combined
- 1209:f3fc
- Decimal
- 4617:62460
What is this device?
This is the USB identifier for a dRonin Flight controller-Lumenier Lux manufactured by Generic. The vendor ID 1209 is registered to Generic with the USB Implementers Forum, and f3fc is the product ID that Generic assigned to this particular model. When you run lsusb on Linux, this device appears as 1209:f3fc Generic dRonin Flight controller-Lumenier Lux.
How to identify it on your system
Linux
$ lsusb Bus 001 Device 004: ID 1209:f3fc Generic dRonin Flight controller-Lumenier Lux
You can filter directly with lsusb -d 1209:f3fc, or get the full descriptor dump with lsusb -v -d 1209:f3fc. Kernel messages from dmesg show the same pair as idVendor=1209, idProduct=f3fc.
Windows
In Device Manager, open the device, go to Details → Hardware Ids. This device reports:
USB\VID_1209&PID_F3FC USB\VID_1209&PID_F3FC&REV_0100
From PowerShell: Get-PnpDevice | Where-Object InstanceId -match "VID_1209&PID_F3FC"
macOS
$ system_profiler SPUSBDataType
dRonin Flight controller-Lumenier Lux:
Product ID: 0xf3fc
Vendor ID: 0x1209 (Generic)Driver help
Having driver issues with this device? Most USB devices are handled by a generic class driver; if yours shows up as an unknown device, confirm the ID above first, then check the manufacturer's downloads page.
Raw usb.ids entry
The exact lines this page is generated from, in the upstream source file:
1209 Generic f3fc dRonin Flight controller-Lumenier Lux
More from Generic
- 1209:f12e Michael Bemmerl Feuermelder
- 1209:f16a uri_ba Cougar TQS adapter
- 1209:f16c uri_ba adapter for Vipercore's FCC3 Force Sensing Module
- 1209:f380 Windsor Schmidt MD-380 Open Radio Firmware
- 1209:f49a TimVideos.us & HDMI2USB.tv Projects FPGA Programmer & UART Bridge (PIC based Firmware)
- 1209:fa11 moonglow OpenXHC
- 1209:fa57 3DRacers Pilot Board
- 1209:fa58 3DRacers Pilot Board (Bootloader)