10c4:89e1 — C8051F38x HDMI Extender [UHBX-SW3-WP]
Silicon Labs
- Vendor ID
- 10c4
- Product ID
- 89e1
- Combined
- 10c4:89e1
- Decimal
- 4292:35297
What is this device?
This is the USB identifier for a C8051F38x HDMI Extender [UHBX-SW3-WP] manufactured by Silicon Labs. The vendor ID 10c4 is registered to Silicon Labs with the USB Implementers Forum, and 89e1 is the product ID that Silicon Labs assigned to this particular model. When you run lsusb on Linux, this device appears as 10c4:89e1 Silicon Labs C8051F38x HDMI Extender [UHBX-SW3-WP].
How to identify it on your system
Linux
$ lsusb Bus 001 Device 004: ID 10c4:89e1 Silicon Labs C8051F38x HDMI Extender [UHBX-SW3-WP]
You can filter directly with lsusb -d 10c4:89e1, or get the full descriptor dump with lsusb -v -d 10c4:89e1. Kernel messages from dmesg show the same pair as idVendor=10c4, idProduct=89e1.
Windows
In Device Manager, open the device, go to Details → Hardware Ids. This device reports:
USB\VID_10C4&PID_89E1 USB\VID_10C4&PID_89E1&REV_0100
From PowerShell: Get-PnpDevice | Where-Object InstanceId -match "VID_10C4&PID_89E1"
macOS
$ system_profiler SPUSBDataType
C8051F38x HDMI Extender [UHBX-SW3-WP]:
Product ID: 0x89e1
Vendor ID: 0x10c4 (Silicon Labs)Driver help
Having driver issues with this device? Most USB devices are handled by a generic class driver; if yours shows up as an unknown device, confirm the ID above first, then check the manufacturer's downloads page. Silicon Labs official support →
Raw usb.ids entry
The exact lines this page is generated from, in the upstream source file:
10c4 Silicon Labs 89e1 C8051F38x HDMI Extender [UHBX-SW3-WP]
More from Silicon Labs
- 10c4:88c9 AES HID device
- 10c4:8918 C8051F38x HDMI Audio Extractor [VSA-HA-DP]
- 10c4:8973 C8051F38x HDMI Extender [UHBX-8X]
- 10c4:89c6 SPORTident HID device
- 10c4:89fb Qivicon ZigBee Stick
- 10c4:8a3c C8051F38x HDBaseT Receiver [UHBX-R-XT]
- 10c4:8a6c C8051F38x 4K HDMI Audio Extractor [EMX-AMP]
- 10c4:8acb C8051F38x HDBaseT Wall Plate Receiver with IR, RS-232, and PoH [UHBX-R-WP]