10c3:00a4 — ULS PLS Series Laser Engraver Firmware Loader

This is the USB identifier for a ULS PLS Series Laser Engraver Firmware Loader manufactured by Universal Laser Systems, Inc.. The vendor ID 10c3 is registered to Universal Laser Systems, Inc. with the USB Implementers Forum, and 00a4 is the product ID that Universal Laser Systems, Inc. assigned to this particular model. When you run lsusb on Linux, this device appears as 10c3:00a4 Universal Laser Systems, Inc. ULS PLS Series Laser Engraver Firmware Loader.

Linux

$ lsusb
Bus 001 Device 004: ID 10c3:00a4 Universal Laser Systems, Inc. ULS PLS Series Laser Engraver Firmware Loader

You can filter directly with lsusb -d 10c3:00a4, or get the full descriptor dump with lsusb -v -d 10c3:00a4. Kernel messages from dmesg show the same pair as idVendor=10c3, idProduct=00a4.

Windows

In Device Manager, open the device, go to Details → Hardware Ids. This device reports:

USB\VID_10C3&PID_00A4
USB\VID_10C3&PID_00A4&REV_0100

From PowerShell: Get-PnpDevice | Where-Object InstanceId -match "VID_10C3&PID_00A4"

macOS

$ system_profiler SPUSBDataType
    ULS PLS Series Laser Engraver Firmware Loader:
      Product ID: 0x00a4
      Vendor ID: 0x10c3  (Universal Laser Systems, Inc.)

Having driver issues with this device? Most USB devices are handled by a generic class driver; if yours shows up as an unknown device, confirm the ID above first, then check the manufacturer's downloads page.

The exact lines this page is generated from, in the upstream source file:

10c3  Universal Laser Systems, Inc.
	00a4  ULS PLS Series Laser Engraver Firmware Loader

• 10c3:00a5 ULS Print Support

See all 2 devices from Universal Laser Systems, Inc. →