10b8:0bb8 — DVB-T reference design (MOD300) (cold)

This is the USB identifier for a DVB-T reference design (MOD300) (cold) manufactured by DiBcom. The vendor ID 10b8 is registered to DiBcom with the USB Implementers Forum, and 0bb8 is the product ID that DiBcom assigned to this particular model. When you run lsusb on Linux, this device appears as 10b8:0bb8 DiBcom DVB-T reference design (MOD300) (cold).

Linux

$ lsusb
Bus 001 Device 004: ID 10b8:0bb8 DiBcom DVB-T reference design (MOD300) (cold)

You can filter directly with lsusb -d 10b8:0bb8, or get the full descriptor dump with lsusb -v -d 10b8:0bb8. Kernel messages from dmesg show the same pair as idVendor=10b8, idProduct=0bb8.

Windows

In Device Manager, open the device, go to Details → Hardware Ids. This device reports:

USB\VID_10B8&PID_0BB8
USB\VID_10B8&PID_0BB8&REV_0100

From PowerShell: Get-PnpDevice | Where-Object InstanceId -match "VID_10B8&PID_0BB8"

macOS

$ system_profiler SPUSBDataType
    DVB-T reference design (MOD300) (cold):
      Product ID: 0x0bb8
      Vendor ID: 0x10b8  (DiBcom)

Having driver issues with this device? Most USB devices are handled by a generic class driver; if yours shows up as an unknown device, confirm the ID above first, then check the manufacturer's downloads page.

The exact lines this page is generated from, in the upstream source file:

10b8  DiBcom
	0bb8  DVB-T reference design (MOD300) (cold)

• 10b8:0bb9 DVB-T reference design (MOD300) (warm)
• 10b8:0bc6 DVB-T reference design (MOD3000P) (cold)
• 10b8:0bc7 DVB-T reference design (MOD3000P) (warm)

See all 4 devices from DiBcom →