104d:3001 — ESP301 3 Axis Motion Controller

This is the USB identifier for a ESP301 3 Axis Motion Controller manufactured by Newport Corporation. The vendor ID 104d is registered to Newport Corporation with the USB Implementers Forum, and 3001 is the product ID that Newport Corporation assigned to this particular model. When you run lsusb on Linux, this device appears as 104d:3001 Newport Corporation ESP301 3 Axis Motion Controller.

Linux

$ lsusb
Bus 001 Device 004: ID 104d:3001 Newport Corporation ESP301 3 Axis Motion Controller

You can filter directly with lsusb -d 104d:3001, or get the full descriptor dump with lsusb -v -d 104d:3001. Kernel messages from dmesg show the same pair as idVendor=104d, idProduct=3001.

Windows

In Device Manager, open the device, go to Details → Hardware Ids. This device reports:

USB\VID_104D&PID_3001
USB\VID_104D&PID_3001&REV_0100

From PowerShell: Get-PnpDevice | Where-Object InstanceId -match "VID_104D&PID_3001"

macOS

$ system_profiler SPUSBDataType
    ESP301 3 Axis Motion Controller:
      Product ID: 0x3001
      Vendor ID: 0x104d  (Newport Corporation)

Having driver issues with this device? Most USB devices are handled by a generic class driver; if yours shows up as an unknown device, confirm the ID above first, then check the manufacturer's downloads page.

The exact lines this page is generated from, in the upstream source file:

104d  Newport Corporation
	3001  ESP301 3 Axis Motion Controller

• 104d:1003 Model-52 LED Light Source Power Supply and Driver

See all 2 devices from Newport Corporation →