0fe9:9010 — FusionRemote IR receiver
DVICO
- Vendor ID
- 0fe9
- Product ID
- 9010
- Combined
- 0fe9:9010
- Decimal
- 4073:36880
What is this device?
This is the USB identifier for a FusionRemote IR receiver manufactured by DVICO. The vendor ID 0fe9 is registered to DVICO with the USB Implementers Forum, and 9010 is the product ID that DVICO assigned to this particular model. When you run lsusb on Linux, this device appears as 0fe9:9010 DVICO FusionRemote IR receiver.
How to identify it on your system
Linux
$ lsusb Bus 001 Device 004: ID 0fe9:9010 DVICO FusionRemote IR receiver
You can filter directly with lsusb -d 0fe9:9010, or get the full descriptor dump with lsusb -v -d 0fe9:9010. Kernel messages from dmesg show the same pair as idVendor=0fe9, idProduct=9010.
Windows
In Device Manager, open the device, go to Details → Hardware Ids. This device reports:
USB\VID_0FE9&PID_9010 USB\VID_0FE9&PID_9010&REV_0100
From PowerShell: Get-PnpDevice | Where-Object InstanceId -match "VID_0FE9&PID_9010"
macOS
$ system_profiler SPUSBDataType
FusionRemote IR receiver:
Product ID: 0x9010
Vendor ID: 0x0fe9 (DVICO)Driver help
Having driver issues with this device? Most USB devices are handled by a generic class driver; if yours shows up as an unknown device, confirm the ID above first, then check the manufacturer's downloads page.
Raw usb.ids entry
The exact lines this page is generated from, in the upstream source file:
0fe9 DVICO 9010 FusionRemote IR receiver