0fce:d12e — Xperia X10

This is the USB identifier for a Xperia X10 manufactured by Sony Ericsson Mobile Communications AB. The vendor ID 0fce is registered to Sony Ericsson Mobile Communications AB with the USB Implementers Forum, and d12e is the product ID that Sony Ericsson Mobile Communications AB assigned to this particular model. When you run lsusb on Linux, this device appears as 0fce:d12e Sony Ericsson Mobile Communications AB Xperia X10.

Linux

$ lsusb
Bus 001 Device 004: ID 0fce:d12e Sony Ericsson Mobile Communications AB Xperia X10

You can filter directly with lsusb -d 0fce:d12e, or get the full descriptor dump with lsusb -v -d 0fce:d12e. Kernel messages from dmesg show the same pair as idVendor=0fce, idProduct=d12e.

Windows

In Device Manager, open the device, go to Details → Hardware Ids. This device reports:

USB\VID_0FCE&PID_D12E
USB\VID_0FCE&PID_D12E&REV_0100

From PowerShell: Get-PnpDevice | Where-Object InstanceId -match "VID_0FCE&PID_D12E"

macOS

$ system_profiler SPUSBDataType
    Xperia X10:
      Product ID: 0xd12e
      Vendor ID: 0x0fce  (Sony Ericsson Mobile Communications AB)

Having driver issues with this device? Most USB devices are handled by a generic class driver; if yours shows up as an unknown device, confirm the ID above first, then check the manufacturer's downloads page.

The exact lines this page is generated from, in the upstream source file:

0fce  Sony Ericsson Mobile Communications AB
	d12e  Xperia X10

• 0fce:d0cf MD300 Mobile Broadband Modem
• 0fce:d0d4 C902 Phone [Modem]
• 0fce:d0e1 MD400 Mobile Broadband Modem
• 0fce:d12a U100i Yari Phone
• 0fce:d14e J108i Cedar (modem mode)
• 0fce:e000 K810 (PictBridge mode)
• 0fce:e039 K800i (msc mode)
• 0fce:e042 W810i Phone

See all 115 devices from Sony Ericsson Mobile Communications AB →