0e6f:0008 — After Glow Pro Controller
Logic3
- Vendor ID
- 0e6f
- Product ID
- 0008
- Combined
- 0e6f:0008
- Decimal
- 3695:8
What is this device?
This is the USB identifier for a After Glow Pro Controller manufactured by Logic3. The vendor ID 0e6f is registered to Logic3 with the USB Implementers Forum, and 0008 is the product ID that Logic3 assigned to this particular model. When you run lsusb on Linux, this device appears as 0e6f:0008 Logic3 After Glow Pro Controller.
How to identify it on your system
Linux
$ lsusb Bus 001 Device 004: ID 0e6f:0008 Logic3 After Glow Pro Controller
You can filter directly with lsusb -d 0e6f:0008, or get the full descriptor dump with lsusb -v -d 0e6f:0008. Kernel messages from dmesg show the same pair as idVendor=0e6f, idProduct=0008.
Windows
In Device Manager, open the device, go to Details → Hardware Ids. This device reports:
USB\VID_0E6F&PID_0008 USB\VID_0E6F&PID_0008&REV_0100
From PowerShell: Get-PnpDevice | Where-Object InstanceId -match "VID_0E6F&PID_0008"
macOS
$ system_profiler SPUSBDataType
After Glow Pro Controller:
Product ID: 0x0008
Vendor ID: 0x0e6f (Logic3)Driver help
Having driver issues with this device? Most USB devices are handled by a generic class driver; if yours shows up as an unknown device, confirm the ID above first, then check the manufacturer's downloads page.
Raw usb.ids entry
The exact lines this page is generated from, in the upstream source file:
0e6f Logic3 0008 After Glow Pro Controller