0e2c:0018 — footscan 2D interface box

This is the USB identifier for a footscan 2D interface box manufactured by Materialise Motion NV. The vendor ID 0e2c is registered to Materialise Motion NV with the USB Implementers Forum, and 0018 is the product ID that Materialise Motion NV assigned to this particular model. When you run lsusb on Linux, this device appears as 0e2c:0018 Materialise Motion NV footscan 2D interface box.

Linux

$ lsusb
Bus 001 Device 004: ID 0e2c:0018 Materialise Motion NV footscan 2D interface box

You can filter directly with lsusb -d 0e2c:0018, or get the full descriptor dump with lsusb -v -d 0e2c:0018. Kernel messages from dmesg show the same pair as idVendor=0e2c, idProduct=0018.

Windows

In Device Manager, open the device, go to Details → Hardware Ids. This device reports:

USB\VID_0E2C&PID_0018
USB\VID_0E2C&PID_0018&REV_0100

From PowerShell: Get-PnpDevice | Where-Object InstanceId -match "VID_0E2C&PID_0018"

macOS

$ system_profiler SPUSBDataType
    footscan 2D interface box:
      Product ID: 0x0018
      Vendor ID: 0x0e2c  (Materialise Motion NV)

Having driver issues with this device? Most USB devices are handled by a generic class driver; if yours shows up as an unknown device, confirm the ID above first, then check the manufacturer's downloads page.

The exact lines this page is generated from, in the upstream source file:

0e2c  Materialise Motion NV
	0018  footscan 2D interface box

• 0e2c:0012 footscan pressure plate (0.5m)
• 0e2c:0013 footscan pressure plate (1.0m)
• 0e2c:0020 footscan pressure plate (1.5m)
• 0e2c:002d footscan heavy duty pressure plate (1.0m)

See all 5 devices from Materialise Motion NV →