0dd4:0237 — K80 80mm Thermal Printer
Custom Engineering SPA
- Vendor ID
- 0dd4
- Product ID
- 0237
- Combined
- 0dd4:0237
- Decimal
- 3540:567
What is this device?
This is the USB identifier for a K80 80mm Thermal Printer manufactured by Custom Engineering SPA. The vendor ID 0dd4 is registered to Custom Engineering SPA with the USB Implementers Forum, and 0237 is the product ID that Custom Engineering SPA assigned to this particular model. When you run lsusb on Linux, this device appears as 0dd4:0237 Custom Engineering SPA K80 80mm Thermal Printer.
How to identify it on your system
Linux
$ lsusb Bus 001 Device 004: ID 0dd4:0237 Custom Engineering SPA K80 80mm Thermal Printer
You can filter directly with lsusb -d 0dd4:0237, or get the full descriptor dump with lsusb -v -d 0dd4:0237. Kernel messages from dmesg show the same pair as idVendor=0dd4, idProduct=0237.
Windows
In Device Manager, open the device, go to Details → Hardware Ids. This device reports:
USB\VID_0DD4&PID_0237 USB\VID_0DD4&PID_0237&REV_0100
From PowerShell: Get-PnpDevice | Where-Object InstanceId -match "VID_0DD4&PID_0237"
macOS
$ system_profiler SPUSBDataType
K80 80mm Thermal Printer:
Product ID: 0x0237
Vendor ID: 0x0dd4 (Custom Engineering SPA)Driver help
Having driver issues with this device? Most USB devices are handled by a generic class driver; if yours shows up as an unknown device, confirm the ID above first, then check the manufacturer's downloads page.
Raw usb.ids entry
The exact lines this page is generated from, in the upstream source file:
0dd4 Custom Engineering SPA 0237 K80 80mm Thermal Printer