0d97:0101 — SBIG Astronomy Camera (with firmware)

This is the USB identifier for a SBIG Astronomy Camera (with firmware) manufactured by Santa Barbara Instrument Group. The vendor ID 0d97 is registered to Santa Barbara Instrument Group with the USB Implementers Forum, and 0101 is the product ID that Santa Barbara Instrument Group assigned to this particular model. When you run lsusb on Linux, this device appears as 0d97:0101 Santa Barbara Instrument Group SBIG Astronomy Camera (with firmware).

Linux

$ lsusb
Bus 001 Device 004: ID 0d97:0101 Santa Barbara Instrument Group SBIG Astronomy Camera (with firmware)

You can filter directly with lsusb -d 0d97:0101, or get the full descriptor dump with lsusb -v -d 0d97:0101. Kernel messages from dmesg show the same pair as idVendor=0d97, idProduct=0101.

Windows

In Device Manager, open the device, go to Details → Hardware Ids. This device reports:

USB\VID_0D97&PID_0101
USB\VID_0D97&PID_0101&REV_0100

From PowerShell: Get-PnpDevice | Where-Object InstanceId -match "VID_0D97&PID_0101"

macOS

$ system_profiler SPUSBDataType
    SBIG Astronomy Camera (with firmware):
      Product ID: 0x0101
      Vendor ID: 0x0d97  (Santa Barbara Instrument Group)

Having driver issues with this device? Most USB devices are handled by a generic class driver; if yours shows up as an unknown device, confirm the ID above first, then check the manufacturer's downloads page.

The exact lines this page is generated from, in the upstream source file:

0d97  Santa Barbara Instrument Group
	0101  SBIG Astronomy Camera (with firmware)

• 0d97:0001 SBIG Astronomy Camera (without firmware)

See all 2 devices from Santa Barbara Instrument Group →