0d7d:110e — NEC uPD720121/130 USB-ATA/ATAPI Bridge
Phison Electronics Corp.
- Vendor ID
- 0d7d
- Product ID
- 110e
- Combined
- 0d7d:110e
- Decimal
- 3453:4366
What is this device?
This is the USB identifier for a NEC uPD720121/130 USB-ATA/ATAPI Bridge manufactured by Phison Electronics Corp.. The vendor ID 0d7d is registered to Phison Electronics Corp. with the USB Implementers Forum, and 110e is the product ID that Phison Electronics Corp. assigned to this particular model. When you run lsusb on Linux, this device appears as 0d7d:110e Phison Electronics Corp. NEC uPD720121/130 USB-ATA/ATAPI Bridge.
How to identify it on your system
Linux
$ lsusb Bus 001 Device 004: ID 0d7d:110e Phison Electronics Corp. NEC uPD720121/130 USB-ATA/ATAPI Bridge
You can filter directly with lsusb -d 0d7d:110e, or get the full descriptor dump with lsusb -v -d 0d7d:110e. Kernel messages from dmesg show the same pair as idVendor=0d7d, idProduct=110e.
Windows
In Device Manager, open the device, go to Details → Hardware Ids. This device reports:
USB\VID_0D7D&PID_110E USB\VID_0D7D&PID_110E&REV_0100
From PowerShell: Get-PnpDevice | Where-Object InstanceId -match "VID_0D7D&PID_110E"
macOS
$ system_profiler SPUSBDataType
NEC uPD720121/130 USB-ATA/ATAPI Bridge:
Product ID: 0x110e
Vendor ID: 0x0d7d (Phison Electronics Corp.)Driver help
Having driver issues with this device? Most USB devices are handled by a generic class driver; if yours shows up as an unknown device, confirm the ID above first, then check the manufacturer's downloads page.
Raw usb.ids entry
The exact lines this page is generated from, in the upstream source file:
0d7d Phison Electronics Corp. 110e NEC uPD720121/130 USB-ATA/ATAPI Bridge