0c45:6270 — PC Camera (SN9C201 + MI0360/MT9V011 or MI0360SOC/MT9V111) U-CAM PC Camera NE878, Whitcom WHC017, ...

Microdia

Vendor ID: 0c45
Product ID: 6270
Combined: 0c45:6270
Decimal: 3141:25200

What is this device?

This is the USB identifier for a PC Camera (SN9C201 + MI0360/MT9V011 or MI0360SOC/MT9V111) U-CAM PC Camera NE878, Whitcom WHC017, ... manufactured by Microdia. The vendor ID 0c45 is registered to Microdia with the USB Implementers Forum, and 6270 is the product ID that Microdia assigned to this particular model. When you run lsusb on Linux, this device appears as 0c45:6270 Microdia PC Camera (SN9C201 + MI0360/MT9V011 or MI0360SOC/MT9V111) U-CAM PC Camera NE878, Whitcom WHC017, ....

How to identify it on your system

Linux

$ lsusb
Bus 001 Device 004: ID 0c45:6270 Microdia PC Camera (SN9C201 + MI0360/MT9V011 or MI0360SOC/MT9V111) U-CAM PC Camera NE878, Whitcom WHC017, ...

You can filter directly with lsusb -d 0c45:6270, or get the full descriptor dump with lsusb -v -d 0c45:6270. Kernel messages from dmesg show the same pair as idVendor=0c45, idProduct=6270.

Windows

In Device Manager, open the device, go to Details → Hardware Ids. This device reports:

USB\VID_0C45&PID_6270
USB\VID_0C45&PID_6270&REV_0100

From PowerShell: Get-PnpDevice | Where-Object InstanceId -match "VID_0C45&PID_6270"

macOS

$ system_profiler SPUSBDataType
    PC Camera (SN9C201 + MI0360/MT9V011 or MI0360SOC/MT9V111) U-CAM PC Camera NE878, Whitcom WHC017, ...:
      Product ID: 0x6270
      Vendor ID: 0x0c45  (Microdia)

Driver help

Having driver issues with this device? Most USB devices are handled by a generic class driver; if yours shows up as an unknown device, confirm the ID above first, then check the manufacturer's downloads page.

Raw usb.ids entry

The exact lines this page is generated from, in the upstream source file:

0c45  Microdia
	6270  PC Camera (SN9C201 + MI0360/MT9V011 or MI0360SOC/MT9V111) U-CAM PC Camera NE878, Whitcom WHC017, ...

More from Microdia

See all 160 devices from Microdia →