0c30:6010 — Kona 1400 Cutting Plotter
Mutoh Industries Ltd
- Vendor ID
- 0c30
- Product ID
- 6010
- Combined
- 0c30:6010
- Decimal
- 3120:24592
What is this device?
This is the USB identifier for a Kona 1400 Cutting Plotter manufactured by Mutoh Industries Ltd. The vendor ID 0c30 is registered to Mutoh Industries Ltd with the USB Implementers Forum, and 6010 is the product ID that Mutoh Industries Ltd assigned to this particular model. When you run lsusb on Linux, this device appears as 0c30:6010 Mutoh Industries Ltd Kona 1400 Cutting Plotter.
How to identify it on your system
Linux
$ lsusb Bus 001 Device 004: ID 0c30:6010 Mutoh Industries Ltd Kona 1400 Cutting Plotter
You can filter directly with lsusb -d 0c30:6010, or get the full descriptor dump with lsusb -v -d 0c30:6010. Kernel messages from dmesg show the same pair as idVendor=0c30, idProduct=6010.
Windows
In Device Manager, open the device, go to Details → Hardware Ids. This device reports:
USB\VID_0C30&PID_6010 USB\VID_0C30&PID_6010&REV_0100
From PowerShell: Get-PnpDevice | Where-Object InstanceId -match "VID_0C30&PID_6010"
macOS
$ system_profiler SPUSBDataType
Kona 1400 Cutting Plotter:
Product ID: 0x6010
Vendor ID: 0x0c30 (Mutoh Industries Ltd)Driver help
Having driver issues with this device? Most USB devices are handled by a generic class driver; if yours shows up as an unknown device, confirm the ID above first, then check the manufacturer's downloads page.
Raw usb.ids entry
The exact lines this page is generated from, in the upstream source file:
0c30 Mutoh Industries Ltd 6010 Kona 1400 Cutting Plotter