0c2e:0b81 — Barcode scanner Voyager 1400g Series

This is the USB identifier for a Barcode scanner Voyager 1400g Series manufactured by Metrologic Instruments. The vendor ID 0c2e is registered to Metrologic Instruments with the USB Implementers Forum, and 0b81 is the product ID that Metrologic Instruments assigned to this particular model. When you run lsusb on Linux, this device appears as 0c2e:0b81 Metrologic Instruments Barcode scanner Voyager 1400g Series.

Linux

$ lsusb
Bus 001 Device 004: ID 0c2e:0b81 Metrologic Instruments Barcode scanner Voyager 1400g Series

You can filter directly with lsusb -d 0c2e:0b81, or get the full descriptor dump with lsusb -v -d 0c2e:0b81. Kernel messages from dmesg show the same pair as idVendor=0c2e, idProduct=0b81.

Windows

In Device Manager, open the device, go to Details → Hardware Ids. This device reports:

USB\VID_0C2E&PID_0B81
USB\VID_0C2E&PID_0B81&REV_0100

From PowerShell: Get-PnpDevice | Where-Object InstanceId -match "VID_0C2E&PID_0B81"

macOS

$ system_profiler SPUSBDataType
    Barcode scanner Voyager 1400g Series:
      Product ID: 0x0b81
      Vendor ID: 0x0c2e  (Metrologic Instruments)

Having driver issues with this device? Most USB devices are handled by a generic class driver; if yours shows up as an unknown device, confirm the ID above first, then check the manufacturer's downloads page.

The exact lines this page is generated from, in the upstream source file:

0c2e  Metrologic Instruments
	0b81  Barcode scanner Voyager 1400g Series

• 0c2e:0720 Metrologic MS7120 Barcode Scanner (bi-directional serial mode)
• 0c2e:0a64 [Stratos 2700]
• 0c2e:0b61 Vuquest 3310g
• 0c2e:0b6a Vuquest 3310 Area-Imaging Scanner

See all 10 devices from Metrologic Instruments →