0c12:0005 — PSX Vibration Feedback Converter / Intec Wireless Controller for Xbox
Zeroplus
- Vendor ID
- 0c12
- Product ID
- 0005
- Combined
- 0c12:0005
- Decimal
- 3090:5
What is this device?
This is the USB identifier for a PSX Vibration Feedback Converter / Intec Wireless Controller for Xbox manufactured by Zeroplus. The vendor ID 0c12 is registered to Zeroplus with the USB Implementers Forum, and 0005 is the product ID that Zeroplus assigned to this particular model. When you run lsusb on Linux, this device appears as 0c12:0005 Zeroplus PSX Vibration Feedback Converter / Intec Wireless Controller for Xbox.
How to identify it on your system
Linux
$ lsusb Bus 001 Device 004: ID 0c12:0005 Zeroplus PSX Vibration Feedback Converter / Intec Wireless Controller for Xbox
You can filter directly with lsusb -d 0c12:0005, or get the full descriptor dump with lsusb -v -d 0c12:0005. Kernel messages from dmesg show the same pair as idVendor=0c12, idProduct=0005.
Windows
In Device Manager, open the device, go to Details → Hardware Ids. This device reports:
USB\VID_0C12&PID_0005 USB\VID_0C12&PID_0005&REV_0100
From PowerShell: Get-PnpDevice | Where-Object InstanceId -match "VID_0C12&PID_0005"
macOS
$ system_profiler SPUSBDataType
PSX Vibration Feedback Converter / Intec Wireless Controller for Xbox:
Product ID: 0x0005
Vendor ID: 0x0c12 (Zeroplus)Driver help
Having driver issues with this device? Most USB devices are handled by a generic class driver; if yours shows up as an unknown device, confirm the ID above first, then check the manufacturer's downloads page.
Raw usb.ids entry
The exact lines this page is generated from, in the upstream source file:
0c12 Zeroplus 0005 PSX Vibration Feedback Converter / Intec Wireless Controller for Xbox