0b9b:4012 — Reflex RC-controller Interface

This is the USB identifier for a Reflex RC-controller Interface manufactured by Dipl.-Ing. Stefan Kunde. The vendor ID 0b9b is registered to Dipl.-Ing. Stefan Kunde with the USB Implementers Forum, and 4012 is the product ID that Dipl.-Ing. Stefan Kunde assigned to this particular model. When you run lsusb on Linux, this device appears as 0b9b:4012 Dipl.-Ing. Stefan Kunde Reflex RC-controller Interface.

Linux

$ lsusb
Bus 001 Device 004: ID 0b9b:4012 Dipl.-Ing. Stefan Kunde Reflex RC-controller Interface

You can filter directly with lsusb -d 0b9b:4012, or get the full descriptor dump with lsusb -v -d 0b9b:4012. Kernel messages from dmesg show the same pair as idVendor=0b9b, idProduct=4012.

Windows

In Device Manager, open the device, go to Details → Hardware Ids. This device reports:

USB\VID_0B9B&PID_4012
USB\VID_0B9B&PID_4012&REV_0100

From PowerShell: Get-PnpDevice | Where-Object InstanceId -match "VID_0B9B&PID_4012"

macOS

$ system_profiler SPUSBDataType
    Reflex RC-controller Interface:
      Product ID: 0x4012
      Vendor ID: 0x0b9b  (Dipl.-Ing. Stefan Kunde)

Having driver issues with this device? Most USB devices are handled by a generic class driver; if yours shows up as an unknown device, confirm the ID above first, then check the manufacturer's downloads page.

The exact lines this page is generated from, in the upstream source file:

0b9b  Dipl.-Ing. Stefan Kunde
	4012  Reflex RC-controller Interface

See all 1 devices from Dipl.-Ing. Stefan Kunde →