0b81:0200 — CL1356T / CL1356T5 / CL1356A smartcard readers (CCID)

This is the USB identifier for a CL1356T / CL1356T5 / CL1356A smartcard readers (CCID) manufactured by id3 Technologies. The vendor ID 0b81 is registered to id3 Technologies with the USB Implementers Forum, and 0200 is the product ID that id3 Technologies assigned to this particular model. When you run lsusb on Linux, this device appears as 0b81:0200 id3 Technologies CL1356T / CL1356T5 / CL1356A smartcard readers (CCID).

Linux

$ lsusb
Bus 001 Device 004: ID 0b81:0200 id3 Technologies CL1356T / CL1356T5 / CL1356A smartcard readers (CCID)

You can filter directly with lsusb -d 0b81:0200, or get the full descriptor dump with lsusb -v -d 0b81:0200. Kernel messages from dmesg show the same pair as idVendor=0b81, idProduct=0200.

Windows

In Device Manager, open the device, go to Details → Hardware Ids. This device reports:

USB\VID_0B81&PID_0200
USB\VID_0B81&PID_0200&REV_0100

From PowerShell: Get-PnpDevice | Where-Object InstanceId -match "VID_0B81&PID_0200"

macOS

$ system_profiler SPUSBDataType
    CL1356T / CL1356T5 / CL1356A smartcard readers (CCID):
      Product ID: 0x0200
      Vendor ID: 0x0b81  (id3 Technologies)

Having driver issues with this device? Most USB devices are handled by a generic class driver; if yours shows up as an unknown device, confirm the ID above first, then check the manufacturer's downloads page.

The exact lines this page is generated from, in the upstream source file:

0b81  id3 Technologies
	0200  CL1356T / CL1356T5 / CL1356A smartcard readers (CCID)

• 0b81:0002 DFU-Enabled Devices (DFU)
• 0b81:0012 BioPAD biometric module (DFU + CDC)
• 0b81:0102 Certis V1 fingerprint reader
• 0b81:0103 Certis V2 fingerprint reader
• 0b81:0201 CL1356T / CL1356T5 / CL1356A smartcard readers (DFU + CCID)
• 0b81:0220 CL1356A FFPJP smartcard reader (CCID + HID)
• 0b81:0221 CL1356A smartcard reader (DFU + CCID + HID)

See all 9 devices from id3 Technologies →