0b33:0700 — RollerMouse Pro
Contour Design, Inc.
- Vendor ID
- 0b33
- Product ID
- 0700
- Combined
- 0b33:0700
- Decimal
- 2867:1792
What is this device?
This is the USB identifier for a RollerMouse Pro manufactured by Contour Design, Inc.. The vendor ID 0b33 is registered to Contour Design, Inc. with the USB Implementers Forum, and 0700 is the product ID that Contour Design, Inc. assigned to this particular model. When you run lsusb on Linux, this device appears as 0b33:0700 Contour Design, Inc. RollerMouse Pro.
How to identify it on your system
Linux
$ lsusb Bus 001 Device 004: ID 0b33:0700 Contour Design, Inc. RollerMouse Pro
You can filter directly with lsusb -d 0b33:0700, or get the full descriptor dump with lsusb -v -d 0b33:0700. Kernel messages from dmesg show the same pair as idVendor=0b33, idProduct=0700.
Windows
In Device Manager, open the device, go to Details → Hardware Ids. This device reports:
USB\VID_0B33&PID_0700 USB\VID_0B33&PID_0700&REV_0100
From PowerShell: Get-PnpDevice | Where-Object InstanceId -match "VID_0B33&PID_0700"
macOS
$ system_profiler SPUSBDataType
RollerMouse Pro:
Product ID: 0x0700
Vendor ID: 0x0b33 (Contour Design, Inc.)Driver help
Having driver issues with this device? Most USB devices are handled by a generic class driver; if yours shows up as an unknown device, confirm the ID above first, then check the manufacturer's downloads page.
Raw usb.ids entry
The exact lines this page is generated from, in the upstream source file:
0b33 Contour Design, Inc. 0700 RollerMouse Pro