0a07:00d0 — ADU208 Relay I/O Interface

This is the USB identifier for a ADU208 Relay I/O Interface manufactured by Ontrak Control Systems Inc.. The vendor ID 0a07 is registered to Ontrak Control Systems Inc. with the USB Implementers Forum, and 00d0 is the product ID that Ontrak Control Systems Inc. assigned to this particular model. When you run lsusb on Linux, this device appears as 0a07:00d0 Ontrak Control Systems Inc. ADU208 Relay I/O Interface.

Linux

$ lsusb
Bus 001 Device 004: ID 0a07:00d0 Ontrak Control Systems Inc. ADU208 Relay I/O Interface

You can filter directly with lsusb -d 0a07:00d0, or get the full descriptor dump with lsusb -v -d 0a07:00d0. Kernel messages from dmesg show the same pair as idVendor=0a07, idProduct=00d0.

Windows

In Device Manager, open the device, go to Details → Hardware Ids. This device reports:

USB\VID_0A07&PID_00D0
USB\VID_0A07&PID_00D0&REV_0100

From PowerShell: Get-PnpDevice | Where-Object InstanceId -match "VID_0A07&PID_00D0"

macOS

$ system_profiler SPUSBDataType
    ADU208 Relay I/O Interface:
      Product ID: 0x00d0
      Vendor ID: 0x0a07  (Ontrak Control Systems Inc.)

Having driver issues with this device? Most USB devices are handled by a generic class driver; if yours shows up as an unknown device, confirm the ID above first, then check the manufacturer's downloads page.

The exact lines this page is generated from, in the upstream source file:

0a07  Ontrak Control Systems Inc.
	00d0  ADU208 Relay I/O Interface

• 0a07:0064 ADU100 Data Acquisition Interface
• 0a07:0078 ADU120 Data Acquisition Interface
• 0a07:0082 ADU130 Data Acquisition Interface
• 0a07:00c8 ADU200 Relay I/O Interface
• 0a07:00da ADU218 Solid-State Relay I/O Interface

See all 6 devices from Ontrak Control Systems Inc. →