08ca:2019 — Pencam SD 2M (mass storage mode)
Aiptek International, Inc.
- Vendor ID
- 08ca
- Product ID
- 2019
- Combined
- 08ca:2019
- Decimal
- 2250:8217
What is this device?
This is the USB identifier for a Pencam SD 2M (mass storage mode) manufactured by Aiptek International, Inc.. The vendor ID 08ca is registered to Aiptek International, Inc. with the USB Implementers Forum, and 2019 is the product ID that Aiptek International, Inc. assigned to this particular model. When you run lsusb on Linux, this device appears as 08ca:2019 Aiptek International, Inc. Pencam SD 2M (mass storage mode).
How to identify it on your system
Linux
$ lsusb Bus 001 Device 004: ID 08ca:2019 Aiptek International, Inc. Pencam SD 2M (mass storage mode)
You can filter directly with lsusb -d 08ca:2019, or get the full descriptor dump with lsusb -v -d 08ca:2019. Kernel messages from dmesg show the same pair as idVendor=08ca, idProduct=2019.
Windows
In Device Manager, open the device, go to Details → Hardware Ids. This device reports:
USB\VID_08CA&PID_2019 USB\VID_08CA&PID_2019&REV_0100
From PowerShell: Get-PnpDevice | Where-Object InstanceId -match "VID_08CA&PID_2019"
macOS
$ system_profiler SPUSBDataType
Pencam SD 2M (mass storage mode):
Product ID: 0x2019
Vendor ID: 0x08ca (Aiptek International, Inc.)Driver help
Having driver issues with this device? Most USB devices are handled by a generic class driver; if yours shows up as an unknown device, confirm the ID above first, then check the manufacturer's downloads page.
Raw usb.ids entry
The exact lines this page is generated from, in the upstream source file:
08ca Aiptek International, Inc. 2019 Pencam SD 2M (mass storage mode)