0813:0002 — Dual Mode Camera Plus

This is the USB identifier for a Dual Mode Camera Plus manufactured by Mattel, Inc.. The vendor ID 0813 is registered to Mattel, Inc. with the USB Implementers Forum, and 0002 is the product ID that Mattel, Inc. assigned to this particular model. When you run lsusb on Linux, this device appears as 0813:0002 Mattel, Inc. Dual Mode Camera Plus.

Linux

$ lsusb
Bus 001 Device 004: ID 0813:0002 Mattel, Inc. Dual Mode Camera Plus

You can filter directly with lsusb -d 0813:0002, or get the full descriptor dump with lsusb -v -d 0813:0002. Kernel messages from dmesg show the same pair as idVendor=0813, idProduct=0002.

Windows

In Device Manager, open the device, go to Details → Hardware Ids. This device reports:

USB\VID_0813&PID_0002
USB\VID_0813&PID_0002&REV_0100

From PowerShell: Get-PnpDevice | Where-Object InstanceId -match "VID_0813&PID_0002"

macOS

$ system_profiler SPUSBDataType
    Dual Mode Camera Plus:
      Product ID: 0x0002
      Vendor ID: 0x0813  (Mattel, Inc.)

Having driver issues with this device? Most USB devices are handled by a generic class driver; if yours shows up as an unknown device, confirm the ID above first, then check the manufacturer's downloads page.

The exact lines this page is generated from, in the upstream source file:

0813  Mattel, Inc.
	0002  Dual Mode Camera Plus

• 0813:0001 Intel Play QX3 Microscope

See all 2 devices from Mattel, Inc. →