080c:0600 — Gryphon M100 Barcode Scanner

This is the USB identifier for a Gryphon M100 Barcode Scanner manufactured by Datalogic S.p.A.. The vendor ID 080c is registered to Datalogic S.p.A. with the USB Implementers Forum, and 0600 is the product ID that Datalogic S.p.A. assigned to this particular model. When you run lsusb on Linux, this device appears as 080c:0600 Datalogic S.p.A. Gryphon M100 Barcode Scanner.

Linux

$ lsusb
Bus 001 Device 004: ID 080c:0600 Datalogic S.p.A. Gryphon M100 Barcode Scanner

You can filter directly with lsusb -d 080c:0600, or get the full descriptor dump with lsusb -v -d 080c:0600. Kernel messages from dmesg show the same pair as idVendor=080c, idProduct=0600.

Windows

In Device Manager, open the device, go to Details → Hardware Ids. This device reports:

USB\VID_080C&PID_0600
USB\VID_080C&PID_0600&REV_0100

From PowerShell: Get-PnpDevice | Where-Object InstanceId -match "VID_080C&PID_0600"

macOS

$ system_profiler SPUSBDataType
    Gryphon M100 Barcode Scanner:
      Product ID: 0x0600
      Vendor ID: 0x080c  (Datalogic S.p.A.)

Having driver issues with this device? Most USB devices are handled by a generic class driver; if yours shows up as an unknown device, confirm the ID above first, then check the manufacturer's downloads page.

The exact lines this page is generated from, in the upstream source file:

080c  Datalogic S.p.A.
	0600  Gryphon M100 Barcode Scanner

• 080c:0300 Gryphon D120 Barcode Scanner
• 080c:0400 Gryphon D120 Barcode Scanner
• 080c:0500 Gryphon D120 Barcode Scanner

See all 4 devices from Datalogic S.p.A. →