0670:0005 — Enable Cable

Sequel Imaging

Vendor ID: 0670
Product ID: 0005
Combined: 0670:0005
Decimal: 1648:5

What is this device?

This is the USB identifier for a Enable Cable manufactured by Sequel Imaging. The vendor ID 0670 is registered to Sequel Imaging with the USB Implementers Forum, and 0005 is the product ID that Sequel Imaging assigned to this particular model. When you run lsusb on Linux, this device appears as 0670:0005 Sequel Imaging Enable Cable.

How to identify it on your system

Linux

$ lsusb
Bus 001 Device 004: ID 0670:0005 Sequel Imaging Enable Cable

You can filter directly with lsusb -d 0670:0005, or get the full descriptor dump with lsusb -v -d 0670:0005. Kernel messages from dmesg show the same pair as idVendor=0670, idProduct=0005.

Windows

In Device Manager, open the device, go to Details → Hardware Ids. This device reports:

USB\VID_0670&PID_0005
USB\VID_0670&PID_0005&REV_0100

From PowerShell: Get-PnpDevice | Where-Object InstanceId -match "VID_0670&PID_0005"

macOS

$ system_profiler SPUSBDataType
    Enable Cable:
      Product ID: 0x0005
      Vendor ID: 0x0670  (Sequel Imaging)

Driver help

Having driver issues with this device? Most USB devices are handled by a generic class driver; if yours shows up as an unknown device, confirm the ID above first, then check the manufacturer's downloads page.

Raw usb.ids entry

The exact lines this page is generated from, in the upstream source file:

0670  Sequel Imaging
	0005  Enable Cable