05da:0093 — ScanMaker V6USL

This is the USB identifier for a ScanMaker V6USL manufactured by Microtek International, Inc.. The vendor ID 05da is registered to Microtek International, Inc. with the USB Implementers Forum, and 0093 is the product ID that Microtek International, Inc. assigned to this particular model. When you run lsusb on Linux, this device appears as 05da:0093 Microtek International, Inc. ScanMaker V6USL.

Linux

$ lsusb
Bus 001 Device 004: ID 05da:0093 Microtek International, Inc. ScanMaker V6USL

You can filter directly with lsusb -d 05da:0093, or get the full descriptor dump with lsusb -v -d 05da:0093. Kernel messages from dmesg show the same pair as idVendor=05da, idProduct=0093.

Windows

In Device Manager, open the device, go to Details → Hardware Ids. This device reports:

USB\VID_05DA&PID_0093
USB\VID_05DA&PID_0093&REV_0100

From PowerShell: Get-PnpDevice | Where-Object InstanceId -match "VID_05DA&PID_0093"

macOS

$ system_profiler SPUSBDataType
    ScanMaker V6USL:
      Product ID: 0x0093
      Vendor ID: 0x05da  (Microtek International, Inc.)

Having driver issues with this device? Most USB devices are handled by a generic class driver; if yours shows up as an unknown device, confirm the ID above first, then check the manufacturer's downloads page.

The exact lines this page is generated from, in the upstream source file:

05da  Microtek International, Inc.
	0093  ScanMaker V6USL

• 05da:0091 ScanMaker X6u
• 05da:0094 Phantom 336CX/C3
• 05da:0099 ScanMaker X6/X6U
• 05da:009a Phantom C6
• 05da:00a0 Phantom 336CX/C3 (#2)

See all 85 devices from Microtek International, Inc. →