05ab:0cda — ATA Bridge for CD-R/RW
In-System Design
- Vendor ID
- 05ab
- Product ID
- 0cda
- Combined
- 05ab:0cda
- Decimal
- 1451:3290
What is this device?
This is the USB identifier for a ATA Bridge for CD-R/RW manufactured by In-System Design. The vendor ID 05ab is registered to In-System Design with the USB Implementers Forum, and 0cda is the product ID that In-System Design assigned to this particular model. When you run lsusb on Linux, this device appears as 05ab:0cda In-System Design ATA Bridge for CD-R/RW.
How to identify it on your system
Linux
$ lsusb Bus 001 Device 004: ID 05ab:0cda In-System Design ATA Bridge for CD-R/RW
You can filter directly with lsusb -d 05ab:0cda, or get the full descriptor dump with lsusb -v -d 05ab:0cda. Kernel messages from dmesg show the same pair as idVendor=05ab, idProduct=0cda.
Windows
In Device Manager, open the device, go to Details → Hardware Ids. This device reports:
USB\VID_05AB&PID_0CDA USB\VID_05AB&PID_0CDA&REV_0100
From PowerShell: Get-PnpDevice | Where-Object InstanceId -match "VID_05AB&PID_0CDA"
macOS
$ system_profiler SPUSBDataType
ATA Bridge for CD-R/RW:
Product ID: 0x0cda
Vendor ID: 0x05ab (In-System Design)Driver help
Having driver issues with this device? Most USB devices are handled by a generic class driver; if yours shows up as an unknown device, confirm the ID above first, then check the manufacturer's downloads page.
Raw usb.ids entry
The exact lines this page is generated from, in the upstream source file:
05ab In-System Design 0cda ATA Bridge for CD-R/RW